D-419 Pair of Alignment Screw Drivers
This dual-purpose set is for use with both insertion-type and chip-type

semi-variable controls.
They are ideal for adjusting trimming machines such as the HS-801.
Set contains 2 screwdrivers

Type	Tip size	Length of shaft (mm)
Insertion type	(-)2.5X0.8	150
Tip type	(-)2.0X0.4	100

D-16 Alignment Screwdriver Set These alignment screwdrivers are for ues with ferrite cores (B/G/H types) and semi-variable resistors. The material used is Duracon, which has excellent insulation and anit-wear; properties. The screwdrivers are usable even in energized high voltage places. No damage to the cores or no slippage occurs. Screwdrivers are provided in four different colors for easy identification.

Part No.	For controls
D-16-1	Without knob D-16-3
D-16-2
D-16-3	With knob D-16-5
D-16-4

D-29 Alignment Screw Driver
This alignment screwdriver has a metal tip only at the end in
order to reduce slippage. The chip type (surface-mount type) can also be used.

D-74 Screw Drivers w/Circuit Tester
-- Voltage: A.C. 100~220V D.C.350V(Max.)

D-86/D-24/D-83