| Sales Rep | Extension |
|---|---|
| Allen | 225 |
| Moses | 232 |
| Derick | 231 |
| HS-35
Micro-Pensol 100/120/220/240V The distance from the grip to the soldering tip is extremely short, so that soldering can be carried out with great steadiness. In the same way that a brush shakes but a pen does not, the soldering iron can be placed on the soldering point with pinpoint accuracy. In particular, this micro-pensol soldering iron is ideal for soldering on high-density surface-mount PCB. Iron Input voltage AC 24V (using special power supply) Power consumption 30W Heater Ceramic heater (metal mold) Temp. range of airflow 300°C~450°C Standard tip HS-272 (0.7mm Ø) Dimensions 165mm (L)X 20 mm max. dia. Weight 40g (w/out cord) Insulation resistance CLASS2 Station Input voltage AC 100/120/220/240V 50/60Hz Power output AC 24V Temperature control Zero voltage cross ON-OFF temperature control circuit Dimensions 75(W)X 131(H) X 165(D) mm Weight 1.9kg Insulation resistance CLASS2 Heats up quickly to 300°C in 20 seconds An extremely efficient metal-molded heater raises the temperature to 300° in 20 seconds. You can use the iron very quickly after turning on. Designed for worldwide use. The input voltage can be switched to any one of four settings (100/120/220/240 V). A slotted screwdriver is only necessary to adjust the voltage to accomodate any voltage supply in any country throughout the world. HS-35 is preset 100V at the shipment from the factory. BS heat sink Provides a soldering point of 45mm The heat generated by the heater located inside the grip is dissipated to the inside of the soldering iron to lower the grip temperature effectively. The design allows pin-point soldering. The BS heat sink has another role too: it also serves as a conductor for leakage current from the tip to the ground via a ground cap and a ground coil. Replacement part HS-126 Heater Good thermal efficiency Metal molded metal over the pattern which efficiently conducts the heat generated by the heater to provide a high thermal capacity. It also has excellent heat conductivity and reacts quickly to temperature control. Replacement Tips also Available |