| Sales Rep | Extension |
|---|---|
| Allen | 225 |
| Moses | 232 |
| Derick | 231 |
 |
N-4-125/150
Diagonal Cutting Plier Diagonal cutter-jaws, has approx. 3° angle. -- Material: KA-70 -- Hardness: HRC 58±4 (cutting section) -- Cutting performance: 2mm dia. Copper wire (N-4-125) 2.6mm dia. Copper wire (N-4-150) Part No. Size N-4-125 125 N-4-150 150 N-5-125/150 Wire-Stripping Diagonal Cutting Plier Same as N-4, but with holes to strip insulated wires. -- Material: KA-70 -- Hardness: HRC 58±4 (cutting section) -- Cutting performance: 2mm dia. Copper wire (N-4-125) 2.6mm dia. Copper wire (N-4-150) Part No. Size N-5-125 125 N-5-150 150 N-9-125/150 Diagonal Cutting Plier Traditionally the most popular type of cutting pliers. -- Material: S58C -- Hardness: HRC 59±3 (cutting section) -- Stripping Hole Dia. (N-9-125) 1.2mm Ø Copper wire: 2.6mm dia. or less (N-4-125) 3.2mm dia. Or less (N-9-150) Steel wire: 1.6mm dia. Or less (N-9-125) 1.9mm dia. Or less (N-9-150) Part No. Size N-9-125 125 N-9-150 150 N-12 Heavy Duty Diagonal Cutting Plier Heavy duty cutters for hard wires. Especially useful for linemen. -- Material: S58C -- Hardness: HRC 59±3 (cutting section). -- Copper wire: 3.2mm dia. Or less Steel wire: 1.9mm or less N-14 Cable Cutter -- 185mm -- Material:S55C -- Hardness HRC 56 (cutting section) -- Special shear angle provides clean cuts of up to 50mm2 copper twisted cable, up to 22mm2 copper single cable. -- Cutting performance: Max. 0.8mm aluminum -- Size: 160mm -- Edge length: 38mm N-15 Wire Cutter -- 200mm -- Material:SK5 -- Hardness HRC 60±2 (cutting section) -- Up to 5.00mm Ø standard steel cable. P-211Z-150/200 Grip Ring Plier -- Material: S55C Part No. Size P-211Z-150 150 P-211Z-200 200 P-245 Water Pump Plier -- Max. opening width (A): 42mm -- Jaw depth (D): 36mm -- O.A.L.: 250mm -- Head thickness: 10mm -- Material:SCrV2 P-246 Heavy Duty Water Pump Plier With multiple rib joint. -- Max. opening width (A): 35mm -- Jaw depth (D): 36mm -- O.A.L.: 250mm -- Head thickness: 9mm -- Material:S55C |
|